cold door 2 led lighting system for cooler doors ? illuminates product facings across narrow beam angles while reducing glare ? powers up to a 5-door frame with a single power supply ? ul classifed for retroft ? up to 85% total energy savings over typical fuorescent fxtures sidelighting cold door 2 lighting system provides crisp, uniform illumination across doors for walk-in coolers/ freezers and remote glass-door reach-ins. adapts to varying case styles and shelf depths. specifcations electrical input voltage 100-240 vac output voltage 24 vdc system power lighting illuminance 1,950 lux 1 color temperature (cct) 3500 k, 4000 k, 5000 k color rendering (cri) 85 performance operating temperature -25 c to 50 c life rating 100,000 hours (l 70 )2 dimming optional motion sensing (see cold series dimming control data sheet) construction housing aluminum lens polycarbonate body color black mounting center mounting clips (2 included) end mounting clips (2 included) documentation warranty 5-year limited agency listings ul classifed, ul (nsf/ansi 2), designlights consortium ? (dlc) files available lm-79, lm-80, ies energy saver standard merchandisermax 4' center 7.5 w 11.5 w 15 w 4' end 4.5 w 7 w 9 w 5 ' center 10 w 15 w 20 w 5 ' end 6 w 9 w 11 w 6 ' center 12.5 w 19 w 25 w 6 ' end 7.5 w 11 w 13 w 1 measured at center of door, at shelf depth of 3.625" from mullion. 2 based on led component manufacturer data. engineered lens C conceals the light source and reduces glare while directing the light across product packaging for narrow shelf depths. power controller C allows the lights to be set at three different power settings (standard, merchandisermax, and energy saver) to balance light output with energy savings. stand-off clip C spaces the light to accommodate mullions with existing mounting hardware that interferes with a fush mount install. occupancy sensing C dims lights with optional controls based on customer occupancy to further increase energy savings. nsf/ansi 2 lighting systems project name/location part number notes# date interior 1
photometrics dimensions ordering information description part number 100 w power supply 701936 100 w power supply (use with dimming or power controller) 701933 power supplies 1 description part number dimming controller2 701890-pwr occupancy sensor, standard 400661 occupancy sensor, wide angle 400964 dimming description part number power controller3 701929 clip, center 4 400686 clip, end 4 400686-end accessories code description 3w 3500 k 4w 4000 k 5w 5000 k color temperature code description 4x 4' 5x 5' 6x 6' code description c center e end length type 701906 2 example: 701906-4wc5x2 center 1 single power supply can drive up to a 5-door frame (exception is 6 ' lights on a 5-door frame requires 2 power supplies). 2 also functions as a power controller, replacing p/n 701929 when dimming is specifed. use with 701933 power supply. 3 required to operate at standard or energy saver power settings. use with 701933 power supply. 4 included with every light are (2) clips. additional quantities available for purchase. end cold door 2 is covered by patents pending. ? 2015 sloanled rev h 2015-04-30 weight = 1.6 lbs (4' center), 2.4 lbs (5' center), 2.9 lbs (6' center), 1.4 lbs (4' end), 2.0 lbs (5' end), 2.4 lbs (6' end) po lar candela cu rv es po lar candela cu rv es 4' center 39.4" 2.7" 1.2" 5' center 57.7" 2.7" 1.2" 6' center 69.6" 2.7" 1.2" 4' end 39.4" 2.0" 1.3" 5' end 57.7" 2.0" 1.3" 6' end 69.6" 2.0" 1.3" horizontal plane vertical plane horizontal plane vertical plane 5725 olivas park drive, ventura, ca 93003 805.676.3200 fax 805.676.3206 info@sloanled.com sloanled.com 2
|
